Atlona Marine Radio AT DVI30SR User Manual

Dual Link DVI over 3 x CAT5/6/7  
Transmitter and Receiver  
AT-DVI30SR  
User Manual  
Toll free: 1-877-536-3976  
Local: 1-408-962-0515  
 
INTRODUCTION  
The Atlona Dual Link DVI transmitter and receiver over three CAT5/6/7 cables is an extension tool for your long  
distance DVI display needs. Dual link DVI cables have a maximum distance of 15 feet before you lose resolu-  
tion. Instead of using a long DVI cable, your existing CAT5/6/7 cables can replace DVI cables while performing  
the same functions like transferring 12 bit Deep color with a bandwidth of up to 2.25 Gbps and without signal  
loss. Moreover, the device has a built-in equalizer and Hot Plug Detect (HPD) function that allows users to enjoy  
a smooth and quick image display. With CAT5 cables you can run 100ft of cable and maintain high resolution  
video up to 2560x1600. However, CAT6 cables will get you 125ft and CAT7 will get you to 150ft between the  
computer or source and the display. This extender is ideal for those that want to achieve the highest resolution  
possible while running a display in a remote location. Its a perfect match for the Apple 30” cinema display,  
BARCO 2K projectors, or others like it, and customers that demand a high level of detail and distortion free  
images. For the best possible performance we recommend using CAT6 or CAT7 cables.  
FEATURES  
• DVI 1.0, HDCP1.1 & HDMI 1.3 compliant  
• Frequency bandwidth up to 2.25 Gbps  
• Supports resolutions up to 2560 x 1600  
• Supports Extended Display Identification Data (EDID) & Consumer Electronics Control (CEC)  
• Receiver unit is passive, power is only for the transmitter.  
PACKAGE CONTENT  
• Dual link DVI over 3 x CAT5/6/7 transmitter  
• Dual link DVI over 3 x CAT5/6/7 receiver  
• 5V DC power supply (only for the transmitter), receiver is passive  
• Operation Manual  
APPLICATIONS  
• Graphics card content display  
• DVI content information sharing  
• Educational displays  
• High resolution graphic design  
SYSTEM REQUIREMENTS  
Dual link DVI source equipment with Dual link DVI input display and 3 x CAT5/6/7 cables.  
Toll free: 1-877-536-3976  
Local: 1-408-962-0515  
2
 
SPECIFICATIONS  
Frequency Bandwidth  
2.25 Gbps  
Transmitter  
Input Port  
1 x Dual link DVI-D  
Output Port  
Input Port  
3 x CAT5/6/7 (2 x Video, 1 x DDC)  
3 x CAT5/6/7 (2 x Video, 1 x DDC)  
1 x Dual link DVI-D  
Receiver  
Output Port  
CAT6 Cable  
1080p 8-bit 30(M), 12-bit 25(M)  
ESD Protection  
Human body model: ± 8kV (air-gap discharge)  
± 4kV (contact discharge)  
Dimensions (in.)  
Power Supply  
Weight (lb)  
3.09”(W) x 4.13”(D) x 1.18”(H)  
1 x 5V DC / 2.6A  
0.8 each box  
Chassis Material  
Silkscreen Color  
Aluminum  
Black  
Power Consumption  
Operating Temperature  
Storage Temperature  
Relative Humidity  
10W  
0oC ~ 40oC / 32oF ~ 104oF  
-20oC ~ 60oC / -4oF ~ 140oF  
20~90% RH (non-condensing)  
PANEL DESCRIPTIONS  
The following sections describe the hardware components of the unit.  
1. Front Panel  
1. DUAL LINK DVI IN: This slot is where you connect to the DVI or HDMI output port of your source equipment such as  
a PC with DVI or HDMI to a DVI cable.  
2. DC 5V Power: This slot is where you plug the 5V DC power supply into the unit and connect the adaptor to an AC  
wall outlet.  
3. POWER LED: This LED will illuminate when the device is connected with power.  
4. LINK LED: When the device detects both the source and display signal the SYNC LED will illuminate.  
5. DUAL LINK DVI OUT: This slot is where you connect to the DVI or HDMI monitor with a DVI or DVI to HDMI cable.  
Toll free: 1-877-536-3976  
Local: 1-408-962-0515  
3
 
2. Rear Panel  
1. POWER/DDC: Connect the DDC output of the transmitter to the DDC input of the receiver unit using CAT5/6/7 cables.  
2. VIDEO 2: Connect the VIDEO 2 output of the transmitter to the VIDEO 2 input of the receiver unit using CAT5/6/7  
cables.  
3. VIDEO 1: Connect the VIDEO 1 output of the transmitter to the VIDEO 1 input of the receiver unit using CAT5/6/7  
cables.  
PIN ASSIGNMENT  
1. Dual Link DVI-D Pin Definition  
DVI-D Receptacle Connector  
Digital-Only Connector Pin Assignments  
Pin  
1
Signal Assignment  
T.M.D.S Data2-  
T.M.D.S Data2+  
T.M.D.S. Data2/4 Shield  
TMDS Data 4-  
TMDS Data 4+  
DDC Clock  
Pin  
9
Signal Assignment  
T.M.D.S Data1-  
T.M.D.S Data1+  
T.M.D.S. Data1/3 Shield  
TMDS Data 3-  
Pin  
17  
18  
19  
20  
21  
22  
23  
24  
Signal Assignment  
T.M.D.S Data0-  
2
10  
11  
12  
13  
14  
15  
16  
T.M.D.S Data0+  
3
T.M.D.S. Data0/5 Shield  
TMDS Data 5-  
4
5
TMDS Data 3+  
TMDS Data 5+  
6
+5V Power  
T.M.D.S. Clock Shield  
T.M.D.S. Clock+  
T.M.D.S. Clock-  
7
DDC Data  
Ground (for +5)  
Hot Plug Detect  
8
No Connect  
Toll free: 1-877-536-3976  
Local: 1-408-962-0515  
4
 
2. RJ-45 Pin Definitions  
Pin  
1
Video  
TX2+  
TX2-  
DDC  
DDC Bus Clock  
NC  
2
3
TX1+  
TX0+  
TX0-  
DDC Bus Data  
Power 5V  
GND  
4
5
6
TX1-  
IR IN  
7
TXC+  
TXC-  
HPD  
8
CEC  
CONNECTION DIAGRAM  
DVI or HDMI to  
DVI Cable  
PC  
RECEIVER  
3xCAT5/6/7 cables  
TRANSMITTER  
DVI or DVI to  
HDMI Cable  
Monitor  
Toll free: 1-877-536-3976  
Local: 1-408-962-0515  
5
 
SAFETY INFORMATION  
Safeguards  
To reduce the risk of electric shock, do not  
expose this product to rain or moisture  
Do not modify the wall plug. Doing so will  
void the warranty and safety features.  
If the wall plug does not fit into your local  
power socket, hire an electrician to replace  
your obsolete socket.  
This equipment should be installed near  
the socket outlet and the device should  
be easily accessible in the case it requires  
disconnection.  
Precautions  
FCC regulations state that any unauthorized changes or modifications to this equipment, not expressly ap-  
proved by the manufacturer, could void the users authority to operate this equipment.  
Operate this product using only the included external power supply. Use of other power supplies could impair  
performance, damage the product, or cause fires.  
In the event of an electrostatic discharge this device may automatically turn off. If this occurs, unplug the device  
and plug it back in.  
Protect and route power cords so they will not be stepped on or pinched by anything placed on or against  
them. Be especially careful of plug-ins or cord exit points from this product.  
Avoid excessive humidity, sudden temperature changes or temperature extremes.  
Keep this product away from wet locations such as bathtubs, sinks, laundries, wet basements, fish tanks, and  
swimming pools.  
Use only accessories recommended by Atlona to avoid fire, shock, or other hazards.  
Unplug the product before cleaning. Use a damp cloth for cleaning and not cleaning fluid or aerosols.  
Such products could enter the unit and cause damage, fire, or electric shock. Some substances may also mar  
the finish of the product.  
Never open, remove unit panels, or make any adjustments not described in this manual. Attempting to do so  
could expose you to dangerous electrical shock or other hazards. It may also cause damage to your AT-DVID-  
30SR. Opening the product will void the warranty.  
Do not attempt to service the unit. Disconnect the product and contact your authorized Atlona reseller or con-  
tact Atlona directly.  
Toll free: 1-877-536-3976  
Local: 1-408-962-0515  
6
 
WARRANTY  
Limited Warranty  
Atlona Technologies warrants that (a) its products (the AT-DVID30SR) will perform substantially in accordance  
with the accompanying written materials for a period of 3 years from the date of receipt and (b) that the  
product will be free from defects in materials and workmanship under normal use and service for a period of  
3 years. In the event applicable law imposes any implied warranties, the implied warranty period is limited to 3  
years from the date of receipt. Some jurisdictions do not allow such limitations on duration of an implied war-  
ranty, so the above limitation may not apply to customers that fall within those areas.  
Customer Remedies  
Atlona Technologies’ and its suppliers’ entire liability and Customers exclusive remedy shall be, at Atlona Tech-  
nologies’ decision, either return of the price paid for the product, repair, or replacement of the product that  
does not meet this Limited Warranty and which is returned to Atlona Technologies with a copy of the Cus-  
tomers receipt. This Limited Warranty is void if failure of the product has resulted from accident, abuse, misap-  
plication, or natural occurrence. In example but not limited to: power surges (electrical storms, local power out-  
age), dropping the product (or items on the product), contact with fluids, and physical misconduct (i.e. kicking  
or punching). Any replacement product will be warranted for the remainder of the original warranty period.  
No other warranties  
To the maximum extent permitted by applicable law, Atlona Technologies and its suppliers disclaim all other  
warranties, either expressed or implied, including, but not limited to, implied warranties of merchantability  
and fitness for a particular purpose, with regard to the product and any related written materials. This Limited  
Warranty gives customer specific legal rights. Customers may have other rights depending on the jurisdiction.  
No liability for damages  
To the maximum extent permitted by applicable law, in no event shall Atlona Technologies or its suppliers be  
liable for any damages arising out of the use of or inability to use this product, even if Atlona Technologies has  
been advised of the possibility of such damages. Such damages include but are not limited to: special, inciden-  
tal, consequential, or indirect damages for personal injury, loss of business profits, business interruption, loss  
of business information, or any other pecuniary loss.  
Atlona Technologies’ and its suppliers’ entire liability under any provision of this agreement shall be limited to  
the amount actually paid by you for the product. Some Jurisdictions do not allow the exclusion or limitation  
of liability for consequential or incidental damage. The above limitations may not apply to you in such jurisdic-  
tional cases.  
Toll free: 1-877-536-3976  
Local: 1-408-962-0515  
7
 
ATLONA PRODUCT REGISTRATION  
Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an extra few  
moments to register your new purchase.  
Registration creates an ownership record if your product is lost or stolen and helps ensure you’ll  
receive notification of performance issues and firmware updates.  
At Atlona, we respect and protect your privacy, assuring you that your registration information  
is completely secure. Atlona product registration is completely voluntary and failure to register will not  
diminish your limited warranty rights.  
Toll free: 1-877-536-3976  
8
Local: 1-408-962-0515  
 

3Com Security Camera FlexWATCH 3110 User Manual
Abit Computer Hardware KV 85 User Manual
Alpine Universal Remote TCS V430A User Manual
Alto Shaam Oven MN 29491 User Manual
Amerec Portable Generator W K60 User Manual
Aspen Touch Solutions Computer Monitor ATM 123R Series User Manual
Ativa Network Router AWGR54 User Manual
Baby Trend Baby Accessories 1866CT User Manual
Barco Projector 4MP 6MP User Manual
BC Speakers Speaker 18TBX100 User Manual